T-Thruster Flat Set

Similar to the K-Flats, the T-Thruster Flats are larger, to replace underfoot details on larger MG and PG kits, or for lower profile, larger thrusters. This set contains enough parts to create two thruster bells. Machined out of aluminum, they can be painted or just polished as shown in the above image (or both). 19mm open end diameter, 9mm tall.
$16.00 per set

T - Thruster Flat Set Contents:

• 2 x T-Bell Flat

• 6 x T-Bell Small

• 2 x T-Baffle Flat

• 6 x Socket Pin Short