F-Thruster

Made up of two parts, this thruster contains a bell and baffle. The bell is machined out of aluminum, and the baffle is machined out of polycarbonate, and can be painted or just polished as shown in the above image (or both). This thruster was machined so that a 3mm LED (not included) could be inserted behind the baffle, allowing the baffle and internals to light up - and you can paint the baffle so that you control where the light comes out (along the edge, in the middle, all over - wherever you want!). 14mm open end diameter, 10mm tall.

$7.00 per set of 2