 |
The MechaSkunk Store - Balls, Beads, and Screws
The balls, beads, and screws offered here can be used to make panel details, replicate gun barrels, vents, etc. Use the appropriate sized drill for each bead size - if you have them, great, if not, check out the Tool section, and order them there! Once the hole is drilled, insert the bead (preferably after painting), and glue in place. Also, check out the TUTORIAL for tips and techniques on how to add stainless steel balls, straight tube beads, and screws to your models.
Additional Images
 |
 |
 |
 |
| Master Grade GP02A, 2.0mm Straight Tube Beads |
Master Grade GP02A, 1.0mm Straight Tube Beads |
Master Grade GP02A, 1.0mm Straight Tube Bead inside a 2.0mm Straight Tube Bead |
FichtenFoo's Zephyranthes Reginæ, using 1.0mm Straight Tube Beads |
 |
 |
 |
 |
| FichtenFoo's Gelgoog NT, using 1.7mm Screws on the chest and 1.0mm Straight Tube Beads |
FichtenFoo's Zeon GM, using 2.0mm Straight Tube Beads for the vulcans and 1.8mm Screws on the chest |
A Perfect Grade Zaku II leg showing off the 1.5mm and 2.0mm Stainless Steel Balls |
FichtenFoo's Zeon GM Shield, using 1.0mm Stainless Steel Beads |
|
|
