Yamato 1/48 VF-1A Valkyrie Head Lasers

The third release in my Yamato 1/48 Valkyrie hollow head laser lineup is for the VF-1A. The difference between this and previous releases - the 1S lasers are only useable on recast heads - there is no easy way to take apart the original 1S head - and the 1D head is only available as a resin part for the VF-1D conversion kit. Thankfully, it is relatively easy to take apart the VF-1A head - I've tried both the Hikaru and the Low Vis versions, and they came apart very easily - so this modification can be made to any VF-1A - except for possibly the Cannon Fodder - just tried taking apart a CF head, and I couldn't get it apart (didn't want to force it). Onto the actual laser - I used the same resculpted laser that I made the 1D lasers with, and grafted it onto the circular part of the original 1A head laser I had. Everything turned out fine, and I've made the first mold already - and have already pulled the first hollow headlaser from it - as seen in the images below. I should be able to cast a few more masters, to make a larger mold to cast multiples from, and be able to make these available shortly - stay tuned!